新闻中心
Home > News Center > industry news

ZNFH Water Glue Laminators: Comparing Automation and Supply Scope

2026-10-08 02:44:46

ZNFH1300 / 1400 / 1500 Water Glue Lamination Machine

When comparing water glue laminators, start with the material structure and the functions included in the quotation. An automation label alone does not establish adhesive compatibility, finished quality, staffing needs or production output. Yueda's ZNFH1300, ZNFH1400 and ZNFH1500 product information describes unwinding, gluing, coating, drying and rewinding for paper, film and foil packaging structures.

1. Match the model to the material

The listed paper roll widths are 600–1200 mm for ZNFH1300, 700–1300 mm for ZNFH1400 and 700–1400 mm for ZNFH1500. These are material-width ranges, not the roller face widths indicated by the model names. Check the complete specification against your actual rolls and proposed layer structure.

Provide each substrate's grade, width, thickness or grammage, surface treatment and roll/core dimensions. Include the adhesive data sheet and the intended finished use. A listed material range is a starting point for review, not proof that every coating, adhesive and substrate combination will bond successfully.

2. Compare confirmed functions, not assumptions

Ask the supplier to identify which functions are included, optional or outside the proposed scope:

  • Unwinding and rewinding: roll handling arrangements, operator tasks and roll-change requirements.

  • Gluing and coating: application method, adjustment responsibility and how consistency will be assessed.

  • Drying: suitability for the proposed adhesive and materials, and the site services required.

  • Controls: available displays, alarms, job records and any documented repeat-job functions.

Recipe storage, automatic viscosity control, registration systems and remote diagnostics should be checked individually. Do not assume they are fitted because a machine is described as automatic. This comparison does not present those features as standard ZNFH equipment.

3. Agree a material trial and acceptance method

Use representative materials and the proposed adhesive for a supplier-agreed trial. Define how bonding, surface appearance, winding quality and acceptable waste will be assessed. Record trial conditions and the accepted sample so the results can be compared with the quotation.

Separate published running-speed figures from an agreed production target for your job. Evaluate output together with acceptable quality, roll changes and cleaning or changeover time. Do not treat higher nominal speed as evidence of lower cost or a guaranteed return on investment.

4. Confirm delivery and support responsibilities

Request an itemized scope covering the machine, agreed options, installation responsibilities, training, documentation and spare-parts support. For site preparation, see the water glue laminator installation planning checklist. Specific machine settings and maintenance procedures must follow the supplied model documentation and authorized training.

Discuss your lamination requirements

Send your substrate structure, adhesive information, required width, target roll dimensions and quality criteria through Yueda's contact page for configuration review.

Contact: Peter Chen
Email: peterchen@yuedamachine.com
Phone: +86 18767458866

Contact:  Peter Chen/Jack Chen

Mail  :       peterchen@yuedamachine.com

Cellphone: +86 18767458866/ +86 19857780001

Address: Building 2, No. 1333 Times Avenue, Longgang City,Wenzhou City, Zhejiang Province China

Copyright © 2026 Wenzhou Yueda Packaging Machinery Co., Ltd. All Rights Reserved.

Sitemap

This website uses cookies to ensure you get the best experience on our website.

Accept Reject